BTSBK - ALUMEX 60
- MSDS: BTSBK
- Manufacturer: NATIONAL REFRACTORIES AND MINERALS CORP
- Product Name: ALUMEX 60
- National Stock Number: 3439-00D003302
Product Identification
Product ID:ALUMEX 60
MSDS Date:10/01/1992
FSC:3439
NIIN:00D003302
MSDS Number: BTSBK
Responsible Party
COLUMBIANA, OH 44408-9448
US
Emergency Phone: 510-449-5010
Info Phone: 216-482-3841/415-462-1147
Cage: 4H756
Contractor
Telephone: 216-482-3841/415-462-1147
Cage: 4H756
Ingredients
ALUMINO-SILICATES [GROG]
CAS: 66402-68-4
Fraction By Weight: >90%
SILICA, CRYSTALLINE - CRISTOBALITE
CAS: 14464-46-1
RTECS: VV7325000
Fraction By Weight: <10%
OSHA PEL SEE TABLE Z-3
ACGIH TLV: 0.05 MG/M3 RDUST9394
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY CAUSE EYE
IRRITATION. CHRONIC: LONG TERM EXPOSURE, BY INHALATION, MAY CAUSE
PNEUMOCONIOSIS IN SUSCEPTIBLE PERSONS. PROLONGED OR REPEATED
CONTACT WITH SKIN MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:CRYSTALLINE SILICA IS LISTED BY NTP (AC)
AND IARC (2A) AS AN ANTICIPATED OR SUSPECTED CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:PRE-EXISTING RESPIRATORY CONDITIONS
First Aid
First Aid:SKIN- WASH WITH SOAP AND PLENTY OF WATER. EYES- IRRIGATE
IMMEDIATELY WITH COPIOUS AMOUNTS OF WATER FOR 15 MINUTES. CONSULT
PHYSICIAN IF NECESSARY. INHALATION- REMOVE TO FRESH AIR.
Accidental Release
Spill Release Procedures:USE DUST FREE METHODS OF CLEANUP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:RESPIRATOR APPROVED BY NIOSH/MSHA AND ADEQUATE
FOR CONTAMINANT CONCENTRATION ENCOUNTERED.
Ventilation:LOCAL EXHAUST RECOMMENDED TO MAINTAIN EXPOSURES BELOW TLV'S
AND PEL'S.
Protective Gloves:IMPERVIOUS GLOVES ARE RECOMMENDED
Eye Protection:SAFETY GLASSES ARE RECOMMENDED
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Spec Gravity:0.5 - 3.0
Solubility in Water:NIL
Appearance and Odor:GREY SOLID; NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:FINAL USED PRODUCT SHOULD BE TESTED TO DETERMINE
HAZARD STATUS AND DISPOSED IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.